Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Mono Tri Di Sodium Phosphate etc. in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
Mono Monosodium Monobasic Sodium Phosphate Monobasic Manufacturers
Di Disodium Dibasic Sodium Phosphate Dibasic Manufacturers
Tri Trisodium Tribasic Sodium Phosphate Tribasic Manufacturers
Sodium Phosphate BP USP IP ACS FCC Manufacturers
Sodium Phosphate Dibasic Disodium Phosphate Manufacturers MSDSThe Product is offered in two grades namely Technical Grade and Extra Pure A. R. & IP BP USP FCC ACS grades.
Material Safety Data Sheet Sodium Phosphate Dibasic MSDS Sheet Disodium Phosphate
1. Product Identification
Synonyms: Disodium phosphate; DSP; Disodium hydrogen phosphate, Di sodium phosphate; Sodium phosphate dibasic, Dibasic sodium phosphate
CAS No.: 7558-79-4
Molecular Weight: 141.96
Chemical Formula: Na2HPO4
2. Composition/Information on Ingredients
Ingredient: Sodium Phosphate Dibasic or Disodium Phosphate
CAS No.: 7558-79-4 98
3. Hazards Identification
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT. MAY BE HARMFUL IF SWALLOWED OR INHALED.
Health Rating: 2 - Moderate (Life)
Flammability Rating: 0 - None
Reactivity Rating: 1 - Slight
Contact Rating: 2 - Moderate
Lab Protective Equip: GOGGLES; LAB COAT
Storage Color Code: Green (General Storage)
Potential Health Effects
Inhalation: Sodium Phosphate Dibasic may cause irritation to the respiratory tract. Symptoms may include coughing and shortness of breath.
Ingestion: Phosphates are slowly and incompletely absorbed when ingested, and seldom result in systemic effects. Such effects, however, have occurred. Symptoms may include vomiting, lethargy, diarrhea, blood chemistry effects, heart disturbances and central nervous system effects. The toxicity of phosphates is because of their ability to sequester calcium.
Skin Contact: Disodium Phosphate may cause irritation with redness and pain.
Eye Contact: Di Sodium Phosphate may cause irritation, redness and pain.
Chronic Exposure: Sodium phosphate dibasic may sequester calcium and cause calcium phosphate deposits in the kidneys. Chronic ingestion or inhalation may induce systemic phosphorous poisoning. Liver damage, kidney damage, jaw/tooth abnormalities, blood disorders and cardiovascular effects can result.
Aggravation of Pre-existing Conditions: Persons with pre-existing skin disorders or eye problems, jaw/tooth abnormalities, or impaired liver, kidney or respiratory function may be more susceptible to the effects of the substance.
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is (800) 424-8802.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Sodium phosphate dibasic is white granular powder. Hygroscopic.
Solubility: Disodium phosphate is soluble in water.
Specific Gravity: 2.07 @ 15C/4C
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: 240C (464F) Converts to Na4P2O7
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Sodium phosphate dibasic is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Oral rat LD50: 17 gm/kg. Skin rabbit, standard Draize, 500 mg/24H, mild. Eye rabbit, standard Draize, 500 mg/24H mild.
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Sodium phosphate dibasic container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
15. Regulatory Information
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
16. Other Information
NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0
Label Hazard Warning:
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT. MAY BE HARMFUL IF SWALLOWED OR INHALED.
Avoid contact with eyes, skin and clothing.
Wash thoroughly after handling.
Avoid breathing dust.
Keep container closed.
Use with adequate ventilation.
Label First Aid:
If inhaled, remove to fresh air. Get medical attention for any breathing difficulty. In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Get medical attention if irritation develops or persists. If swallowed, give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Our company provides this Di SODIUM PHOSPHATE, DISODIUM PHOSPHATE MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This DISODIUM PHOSPHATE, SODIUM PHOSPHATE DIBASIC MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Disodium Phosphate Sodium Phosphate Dibasic manufacturers at:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: firstname.lastname@example.org
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.
Commercial Pure & BP USP NF IP ACS AR Analytical Reagent, FCC Food Grades Ammonium Chloride Ammonium Chloride Pharmaceutical grade Ammonium Persulphate Persulfate Barium Chloride Benzyl Alcohol Boric Acid Borax Sodium Calcium Chloride Pharmaceutical grade Calcium Chloride Calcium Hydroxide Calcium Oxide; Lime Calcium Sulfate Calcium D Glucarate Saccharate Chromic Chloride; Chromium Chloride Iron Sulphide or Ferrous Sulfide Gentian Violet Magnesium Chloride Pharmaceutical grade Magnesium Sulfate Maleic Acid Manganese Chloride Manganese Sulfate Mono/Di Ammonium Phosphate Mono/Di/Tri Sodium Phosphate Magnesium Chloride Anhydrous & Hexahydrate Methylene Blue Mono/Di/Tri Potassium Phosphate PCB Etchant or Ammonical Etchant Potassium Bromide Potassium Chloride Potassium Chloride Pharmaceutical grade Sodium Acetate Sodium Acetate Pharmaceutical grade Sodium Bicarbonate Sodium Bromide Sodium Chloride Sodium Hydroxide Sodium Diacetate Sodium Hydroxymethanesulphonate Formaldehyde Bisulphite Sodium Thiosulphate Sodium Thiosulfate Pharmaceutical grade Zinc Chloride Zinc Chloride Pharmaceutical grade Zinc Ammonium Chloride Flux Zinc Sulphate or Zinc Sulfate
Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.
Monopotassium Phosphate Manufacturers; Potassium Phosphate Monobasic
Dipotassium Phosphate Manufacturers; Potassium Phosphate Dibasic
Tripotassium Phosphate Manufacturers; Potassium Phosphate Tribasic
Mono Monosodium Monobasic Sodium Phosphate Monobasic
Di Disodium Dibasic Sodium Phosphate Dibasic
Tri Trisodium Tribasic Sodium Phosphate Tribasic
Mono Ammonium Phosphate or Monoammonium Phosphate
Di Ammonium Phosphate or Diammonium Phosphate