Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Maleic Acid etc. in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
Maleic Acid USP BP IP FCC Food Grade Maleic Acid Manufacturers
CAS No.: 110-16-7, Molecular Weight: 116.1, Chemical Formula: C4H4O4
MSDS of Maleic Acid BP USP IP FCC Food Grade Manufacturers
Specifications Appearance White crystals or powder with a faint acid odor. Melting point 138°C Density (g cm-3) 1.59 Solubility Appreciable in Water. Stability Stable. Combustible. Incompatible with strong oxidizing agents, bases. Toxicology Harmful if swallowed. Corrosive - causes irritation. Packing: 25-50Kg. HDPE Bags or as desired by the buyer
Maleic acid may be used to form acid addition salts with drugs to make them more stable, such as indacaterol maleate. It is used for making Maleate Salts of Bulk-Drugs like Pheneramine Maleate, Chloropheneramine Maleate and others. It is also used to prevent rancidity in oils. Maleic acid has become a new acidulant in food and beverage industry. It can enhance special fruit aroma and improve the taste in food and beverage. At the present time Maleic acid is mainly used in syrup, ready-tea, orange juice, sports beverage and other fortified syrup and food. In addition, Maleic acid is mainly used to manufacture unsaturated polyester resin, pesticide, tartaric acid, fumaric acid, succinic acid, DL-Malic acid, dyeing auxiliary and preservative grease.
Maleic Acid BP
C4H4O4 -- 116.1 -- 110-16-7
Maleic acid contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of (Z)-butenedioic acid, calculated with reference to the anhydrous substance.
A white, crystalline powder, freely soluble in water and in alcohol.
A. Dilute 5 ml of solution S (see Tests) to 10 ml with water. The pH of the dilution is less than 2.
B. Examine the chromatograms obtained in the test for fumaric acid. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (a).
C. Dissolve 0.1 g in 10 ml of water (solution a). To 0.3 ml of solution (a) add a solution of 10 mg of resorcinol in 3 ml of sulphuric acid. Heat on a water-bath for 15 min; no colour develops. To 3 ml of solution (a) add 1 ml of bromine water. Heat on a water-bath to remove the bromine (15 min), heat to boiling and cool. To 0.2 ml of this solution add a solution of 10 mg of resorcinol in 3 ml of sulphuric acid. Heat on a water-bath for 15 min. A violet-pink colour develops.
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and not more intensely colored than reference solution.
To pass the test
To 10 ml of solution S add 2 ml of dilute hydrochloric acid and 0.05 ml of bromine water. After 5 min, remove the excess of bromine by passing a current of air and add 3 ml of potassium thiocyanate solution. Shake. Prepare a standard at the same time and in the same manner, using a mixture of 5 ml of iron standard solution (1 ppm Fe) R, 1 ml of dilute hydrochloric acid, 6 ml of water and 0.05 ml of bromine water. Allow both solutions to stand for 5 min. Any red colour in the test solution is not more intense than that in the standard (5 ppm).
1.0 g complies with limit test D for heavy metals (10 ppm).
Not more than 2.0 per cent, determined on 1.00 g by the semi-micro determination of water.
Not more than 0.1 per cent, determined on 1.0 g.
Maleic Acid USP
Cis-Butenedioic acid [110-16-7].
Maleic Acid contains not less than 99.0 percent and not more than 101.0 percent of C4H4O4, calculated on the anhydrous basis.
A: Dissolve about 500 mg of Maleic Acid in 10 mL of water: the pH of the solution is less than 2.
B: To pass chromatography test
C: Dissolve about 35 mg of resorcinol in 10 mL of sulfuric acid (Resorcinol solution). Dissolve about 100 mg of Maleic Acid in 10 mL of water (Test solution). To 0.3 mL of the Test solution add 3 mL of the Resorcinol solution, and heat in a water bath for 15 minutes: no color develops. To 3 mL of the Test solution add 1 mL of bromine TS, heat in a water bath for 15 minutes to remove the bromine, then heat to boiling, and cool. To 0.2 mL of this solution, add 3 mL of the Resorcinol solution, and heat in a water bath for 15 minutes: a violet-pink color develops.
Color and clarity of solution—
Dilute hydrochloric acid solution— Mix 27.5 mL of hydrochloric acid with sufficient water to make 1000 mL.
Reference solution— Mix 2.4 mL of ferric chloride CS and 0.6 mL of cobaltous chloride CS with Dilute hydrochloric acid solution to make 10 mL. Dilute 5 mL of this solution with Dilute hydrochloric acid solution to make 100 mL.
Test solution— Dissolve about 5 g of Maleic Acid in 50 mL of water.
Procedure— Place the Reference solution and the Test solution in matched color-comparison tubes, and compare the solutions by viewing them downward against a white surface : the Test solution is clear and not more intensely colored than the Reference solution.
Water: not more than 2.0% is found.
Residue on ignition: not more than 0.1%, determined on a 1.0-g portion.
Heavy metals— not more than 10 µg per g.
Limit of fumaric acid— To pass the test
Limit of iron—: not more than 5 µg per g.
Maleic Acid Pure & BP USP IP Manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: firstname.lastname@example.org
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.
Commercial Pure & BP USP NF IP ACS AR Analytical Reagent, FCC Food Grades Ammonium Chloride Ammonium Chloride Pharmaceutical grade Ammonium Persulphate Persulfate Barium Chloride Benzyl Alcohol Boric Acid Borax Sodium Calcium Chloride Pharmaceutical grade Calcium Chloride Calcium Hydroxide Calcium Oxide; Lime Calcium Sulfate Calcium D Glucarate Saccharate Chromic Chloride; Chromium Chloride Iron Sulphide or Ferrous Sulfide Gentian Violet Magnesium Chloride Pharmaceutical grade Magnesium Sulfate Maleic Acid Manganese Chloride Manganese Sulfate Mono/Di Ammonium Phosphate Mono/Di/Tri Sodium Phosphate Magnesium Chloride Anhydrous & Hexahydrate Methylene Blue Mono/Di/Tri Potassium Phosphate PCB Etchant or Ammonical Etchant Potassium Bromide Potassium Chloride Potassium Chloride Pharmaceutical grade Sodium Acetate Sodium Acetate Pharmaceutical grade Sodium Bicarbonate Sodium Bromide Sodium Chloride Sodium Hydroxide Sodium Diacetate Sodium Hydroxymethanesulphonate Formaldehyde Bisulphite Sodium Thiosulphate Sodium Thiosulfate Pharmaceutical grade Zinc Chloride Zinc Chloride Pharmaceutical grade Zinc Ammonium Chloride Flux Zinc Sulphate or Zinc Sulfate
Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.