|
|
Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Magnesium Sulfate etc. in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
----
Magnesium Sulfate USP & Pure Magnesium Sulphate BP Heptahydrate Anhydrous Manufacturers
MSDS of Magnesium Sulfate Sulphate Manufacturers
Magnesium Sulfate Sulphate BP IP USP FCC ACS grade ManufacturersSPECIFICATIONS MAGNESIUM SULFATE HEPTAHYDRATE COMMERCIAL GRADE (& Anhydrous of similar Specs)APPEARANCE ------------------- FINE, WHITE, SPARKLING CRYSTAL, FREE FLOWING
MOLECULAR FORMULA ------------ MgSO4-7H2O Magnesium Sulphate or Magnesium Sulfate
MOLECULAR WT ----------------- 246..47 G/MOL
BULK DENSITY ----------------- 0.92-0.95 KG, / LIT
SOLUBILITY ------------------- READILY SOLUBLE IN WATER
PURITY AS (MgSO4.7H2O)-------- 99% MIN
MAGNESIUM OXIDE AS (MGO)------ 16.20MIN%
MAGNESIUM AS (MG)------------- 9.70%MIN
SULPHUR AS (SO4)-------------- 38.60%MIN
SULPHUR AS (S)---------------- 12.70%MIN
MAGNESIUM SULPHATE AS (MgSO4)- 48.50%MIN Magnesium Sulphate or Magnesium Sulfate
PH OF 5% AQUEOUS SOLUTION----- 7 + / - 0.5
CHLORIDES AS (CL) % BY MASS--- 0.012 % MAX
HEAVY METALS AS (PB) --------- NOT DETECTABLE
ARSENIC AS (AS2O3) ----------- LESS THEN 1.00 PPM MAX
IRON AS (FE) ----------------- 10 PPM MAX
MANGANESE AS (Mn)------------- 15 PPM MAXBritish Pharmacopoeia
Dried Magnesium SulphateDried Magnesium Sulphate BP
Magnesium Sulfate
Dried Epsom SaltsDEFINITION
Dried Magnesium Sulphate contains not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying magnesium sulphate at 100° until it has lost approximately 25% of its weight.CHARACTERISTICS
A white powder.
Freely soluble in water; dissolves more rapidly in hot water.TESTS
Acidity or alkalinity
To 10 ml of a 7.5% w/v solution in carbon dioxide-free water add 0.05 ml of phenol red solution. Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M sodium hydroxide VS is required to change the colour of the solution.
Arsenic
0.33 g dissolved in 25 ml of water complies with the limit test for arsenic, (3 ppm).
Heavy metals
Dissolve 1.3 g in 20 ml of water and add 1 g of ammonium chloride. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
Iron
0.33 g dissolved in 10 ml of water complies with the limit test for iron, Appendix VII (30 ppm).
Chloride
0.13 g dissolved in 15 ml of water complies with the limit test for chlorides, Appendix VII (400 ppm).
Insoluble matter
7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which becomes clear in a few minutes.
British Pharmacopoeia 2009
Magnesium Sulphate HeptahydrateMagnesium Sulphate Heptahydrate BP
Epsom Salts
MgSO4,7H2O -- 246.5 -- 10034-99-8DEFINITION
Content
99.0 per cent to 100.5 per cent (dried substance).CHARACTERS
Appearance
White or almost white, crystalline powder or brilliant, colourless crystals.
Solubility
Freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent).
TESTS Solution S
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.05 ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Chlorides
Maximum 300 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.
Loss on drying
48.0 per cent to 52.0 per cent, determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at 400°C to constant mass.
Magnesium Sulfate USP
MgSO4·xH2O
Sulfuric acid magnesium salt (1:1), hydrate.
Magnesium sulfate (1:1) monohydrate 138.36
Magnesium sulfate (1:1) heptahydrate 246.48 [10034-99-8].
Anhydrous 120.37 [7487-88-9].
Magnesium Sulfate, rendered anhydrous by ignition, contains not less than 99.0 percent and not more than 100.5 percent of MgSO4.pH: between 5.0 and 9.2, in a solution (1 in 20).
Loss on drying— Dry it at 105 for 2 hours: the anhydrous form loses not more than 2% of its weight.
Loss on ignition— Weigh accurately about 1 g in a crucible, heat at 105 for 2 hours, then ignite in a muffle furnace at 450 ± 25 to constant weight: the monohydrate loses between 13.0% and 16.0% of its weight, the dried form loses between 22.0% and 28.0% of its weight, and the heptahydrate loses between 40.0% and 52.0% of its weight.
Chloride— A 1.0-g portion shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Iron—
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING NON-PARENTERAL DOSAGE FORMS—
Dissolve 0.50 g in 40 mL of water and proceed as directed in the test for Iron: the limit is 20 µg per g.
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING PARENTERAL DOSAGE FORMS—
the limit is 0.5 µg per g.
Heavy metals— Dissolve 2 g in 25 mL of water: the limit is 0.001%.
Selenium— The limit is 0.003%.
Magnesium Sulfate FCC Food Grade Magnesium Sulphate
Epsom Salt
MgSO4·xH2O Formula wt, monohydrate 138.38
Formula wt, heptahydrate 246.47
INS: 518 CAS: monohydrate [14168-73-1]
CAS: heptahydrate [10034-99-8]
CAS: dried [15244-36-7]DESCRIPTION
Magnesium Sulfate occurs as a colorless crystal or a granular crystalline powder. It is produced with one or seven molecules of water of hydration or in a dried form containing the equivalent of about 2.3 waters of hydration. It is readily soluble in water, slowly soluble in glycerin, and sparingly soluble in alcohol.
Function Nutrient.REQUIREMENTS
Assay Not less than 99.5% of MgSO4 after ignition.
Lead Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%; Dried: Between 22.0% and 28.0
Selenium Not more than 0.003%.
Magnesium Sulfate ACS Analytical Reagent ( Magnesium Sulphate )
Reagent Chemicals
ACS Specifications
Magnesium Sulfate Heptahydrate
MgSO4 . 7H2O
Formula Wt 246.48
CAS Number 10034-99-8REQUIREMENTS
Assay: 98.0-102.0% MgSO4 . 7H2O
pH of a 5% solution: 5.0-8.2 at 25CMAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 5 ppm
Nitrate (NO3): 0.002%
Ammonium (NH4): 0.002%
Calcium (Ca): 0.02%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Magnesium SulfateMagnesium Sulfate USP manufacturers
Magnesium Sulphate BP manufacturers:MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: usa@mubychem.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.
