Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Sodium Acetate etc in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
Sodium Acetate BP Manufacturers; Sodium Acetate USP manufacturers
Sodium. Acetate MSDS
Sodium Acetate IP Technical & Sodium Acetate BP USP FCC ACS Pure Grade Manufacturers
Sodium Acetate USP
Assay— Sodium Acetate contains three molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent and not more than 101.0 percent of C2H3NaO2, calculated on the dried basis.
pH: between 7.5 and 9.2, in a solution in carbon dioxide-free water containing the equivalent of 30 mg of anhydrous sodium acetate per mL.
Loss on drying— Dry at 120 to constant weight: the hydrous form loses between 38.0% and 41.0% of its weight, and the anhydrous form loses not more than 1.0% of its weight.
Insoluble matter— Dissolve the equivalent of 20 g of anhydrous sodium acetate in 150 mL of water, heat to boiling, and digest in a covered beaker on a steam bath for 1 hour. Filter through a tarred filtering crucible, wash thoroughly, and dry at 105 : the weight of the residue does not exceed 10 mg (0.05%).
Chloride— A portion equivalent to 1.0 g of anhydrous sodium acetate shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate— A portion equivalent to 10 g of anhydrous sodium acetate shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Calcium and magnesium— To 20 mL of a solution containing the equivalent of 10 mg of anhydrous sodium acetate per mL add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Potassium— Dissolve the equivalent of 3 g of anhydrous sodium acetate in 5 mL of water, add 1N acetic acid drop wise until the solution is slightly acidic, and then add 5 drops of sodium cobalt nitrite TS: no precipitate is formed.
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 0.2µ =g per g.
Heavy metals—the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Sodium Acetate Trihydrate BP
Action and use
Used in solutions for dialysis; excipient.
Sodium ethanoate trihydrate.
99.0 per cent to 101.0 per cent (dried substance).
Very soluble in water, soluble in ethanol (96 per cent).
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
7.5 to 9.0.
Dilute 5 ml of solution S to 10 ml with carbon dioxide-free water.
Dissolve 5.0 g in 50 ml of water, then add 5 ml of dilute sulphuric acid and 0.5 ml of 0.002 M potassium permanganate. The pink colour persists for at least 1 h. Prepare a blank in the same manner but without the substance to be examined.
Maximum 200 ppm.
Maximum 200 ppm.
Maximum 0.2 ppm, if intended for use in the manufacture of dialysis solutions.
Maximum 2 ppm, determined on 0.5 g.
Calcium and magnesium
Maximum 50 ppm, calculated as Ca.
Maximum 10 ppm.
Maximum 10 ppm, determined on 10 ml of solution S.
Loss on drying
39.0 per cent to 40.5 per cent, determined on 1.000 g by drying in an oven at 130°C.
Sodium Acetate FCC; Food Chemical Codex
C2H3NaO2 Formula wt, anhydrous 82.03
C2H3NaO2·3H2O Formula wt, trihydrate 136.08
Sodium Acetate occurs as colorless, transparent crystals or as a granular, crystalline or white powder. The anhydrous form is hygroscopic; the trihydrate effloresces in warm, dry air. One gram of the anhydrous form dissolves in about 2 mL of water; 1 g of the trihydrate dissolves in about 0.8 mL of water and in about 19 mL of alcohol.
Assay: Not less than 99.0% and not more than 101.0% of C2H3NaO2 after drying.
Alkalinity: Anhydrous: Not more than 0.2%; Trihydrate: Not more than 0.05%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Anhydrous: Not more than 1.0%; Trihydrate: Between 36.0% and 41.0%.
Potassium Compounds: Passes test.
Sodium Acetate ACS specifications
American Chemical Society Reagent Grade
Sodium Acetate Anhydrous
Formula Wt 82.03
CAS Number 127-09-3
REQUIREMENTSAssay: 99.0% C2H3O2Na
pH of a 5% solution: 7.0-9.2 at 25C
Insoluble matter: 0.01%
Loss on drying at 120C: 1.0%
Chloride (Cl): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Acetate Trihydrate ACSAmerican Chemical Society Reagent Grade
NaC2H3O2 . 3H2O
Formula Wt 136.08
CAS Number 6131-90-4
REQUIREMENTSAssay: 99.0-101% NaC2H3O2-3H2O
pH of a 5% solution: 7.5-9.2 at 25C
Substances reducing permanganate: Passes test
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Potassium (K): 0.005%
Sodium Acetate BP USP FCC ACS manufacturers at:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 01 February, 2013.
Commercial Pure & BP USP NF IP ACS AR Analytical Reagent, FCC Food Grades Ammonium Chloride Ammonium Chloride Pharmaceutical grade Ammonium Persulphate Persulfate Barium Chloride Benzyl Alcohol Boric Acid Borax Sodium Calcium Chloride Pharmaceutical grade Calcium Chloride Calcium Hydroxide Calcium Oxide; Lime Calcium Sulfate Calcium D Glucarate Saccharate Chromic Chloride; Chromium Chloride Iron Sulphide or Ferrous Sulfide Gentian Violet Magnesium Chloride Pharmaceutical grade Magnesium Sulfate Maleic Acid Manganese Chloride Manganese Sulfate Mono/Di Ammonium Phosphate Mono/Di/Tri Sodium Phosphate Magnesium Chloride Anhydrous & Hexahydrate Methylene Blue Mono/Di/Tri Potassium Phosphate PCB Etchant or Ammonical Etchant Potassium Bromide Potassium Chloride Potassium Chloride Pharmaceutical grade Sodium Acetate Sodium Acetate Pharmaceutical grade Sodium Bicarbonate Sodium Bromide Sodium Chloride Sodium Hydroxide Sodium Diacetate Sodium Hydroxymethanesulphonate Formaldehyde Bisulphite Sodium Thiosulphate Sodium Thiosulfate Pharmaceutical grade Zinc Chloride Zinc Chloride Pharmaceutical grade Zinc Ammonium Chloride Flux Zinc Sulphate or Zinc Sulfate
Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference