|
|
Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Sodium Bicarbonate etc. in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
----
Sodium Bicarbonate BP USP IP ACS Manufacturers
MSDS of Sodium Bicarbonate BP IP USP ACS Manufacturers
Sodium Bicarbonate BP
Sodium Hydrogen Carbonate
NaHCO3
84.0ıı144-55-8DEFINITION
Content
99.0 per cent to 101.0 per cent.NaHCO3CHARACTERS
Appearance
White or almost white, crystalline powder.
Solubility
Soluble in water, practically insoluble in ethanol (96 per cent). When heated in the dry state or in solution, it gradually changes into sodium carbonate.TESTS
Solution S
Dissolve 5.0 g in 90 ml of carbon dioxide-free water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Carbonates
The pH of freshly prepared solution S is not greater than 8.6.
Chlorides
Maximum 150 ppm.
Sulphate
Maximum 150 ppm.
Ammonium
Maximum 20 ppm.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 100 ppm.
To a suspension of 1.0 g in 10 ml of distilled water add hydrochloric acid until neutral and dilute to 15 ml with distilled water.
Iron
Maximum 20 ppm.
Heavy metals
Maximum 10 ppm.
Sodium Bicarbonate USP
NaHCO3
84.01
Carbonic acid monosodium salt.
Monosodium carbonateSodium Bicarbonate contains not less than 99.0 percent and not more than 100.5 percent of NaHCO3, calculated on the dried basis.
Loss on drying— Dry about 4 g, accurately weighed, over silica gel for 4 hours: it loses not more than 0.25% of its weight.
Insoluble substances— Dissolve 1 g in 20 mL of water: the resulting solution is complete and clear.
Carbonate (where it is labeled as intended for use in hem dialysis)— The limit of carbonate is not more than 0.23%. to be determined as per tests defined.
Normal carbonate— Add 2.0 mL of 0.10 N hydrochloric acid and 2 drops of phenolphthalein TS to 1.0 g of Sodium Bicarbonate, previously dissolved without agitation in 20 mL of water at a temperature not exceeding 15 : the solution does not assume more than a faint pink color immediately.
Chloride—: a 0.35-g portion shows no more chloride than corresponds to 1.48 mL of 0.0010 N hydrochloric acid (0.015%).
Limit of sulfur compounds— To pass the test
Aluminum (where it is labeled as intended for use in hem dialysis)— The limit is 2 µg per g.
Arsenic— The limit is 2 µg per g.
Calcium and magnesium (where it is labeled as intended for use in hem dialysis)
— the percentage of Ca in the specimen limit is 0.01%.
— the percentage of Mg in the specimen the limit is 0.004%.
Copper (where it is labeled as intended for use in hem dialysis)— Cu in the specimen the limit is 1 µg per g.
Iron (where it is labeled as intended for use in hem dialysis)— not more than 5µg per g.
Heavy metals—the limit is 5 µg per g.
Limit of ammonia— to pass the test
Limit of organics— (where it is labeled as intended for use in hem dialysis)— To pass the test
Sodium Bicarbonate FCC Food grade
Sodium Hydrogen Carbonate; Baking Soda;
Sodium Bicarbonate
NaHCO3 Formula wt 84.01
INS: 500(ii) CAS: [144-55-8]DESCRIPTION
Sodium Bicarbonate occurs as a white, crystalline powder. It is stable in dry air, but it slowly decomposes in moist air. One gram dissolves in 10 mL of water. It is insoluble in alcohol. Its solutions, when freshly prepared with cold water without shaking, are alkaline to litmus. The alkalinity increases as the solutions stand, are agitated, or are heated.REQUIREMENTS
Assay: Not less than 99.0% and not more than 100.5% of NaHCO3 after drying.
Ammonia: Passes test.
Insoluble Substances: Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.25%.
Sodium Bicarbonate ACS Analytical Reagent
Sodium Bicarbonate
Sodium Hydrogen Carbonate
NaHCO3
Formula Wt 84.01
CAS Number 144-55-8REQUIREMENTS
Assay (dried basis): 99.7-100.3% NaHCO3MAXIMUM ALLOWABLE
Insoluble matter: 0.015%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfur compounds (as SO4): 0.003%
Ammonium (NH4): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium BicarbonateSodium Bicarbonate IP BP USP ACS Analytical Reagent manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: usa@mubychem.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.
