|
|
Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Calcium Chloride etc in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
----
Calcium Chloride BP Calcium Chloride USP FCC AR ACS Reagent Food Grade Manufacturers
CaCl2 Anhydrous MSDS Sheet
CaCl2 Fused Dihydrate MSDS Sheet
CaCl2 Hexahydrate & Liquid Solution MSDS SheetCalcium Chloride Anhydrous Fused Commercial Grade
Calcium Chloride Anhydrous Fused Dihydrate Solution Brine BP USP ACS AR Analytical Reagent FCC Food Grade ManufacturersCalcium Chloride USP
Calcium chloride, dihydrate.
CaCl2·2H2O 147.01Assay— Calcium Chloride USP contains an amount of CaCl2 equivalent to not less than 99.0 percent and not more than 107.0 percent of CaCl2·2H2O.
pH: between 4.5 and 9.2, in a solution (1 in 20).
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in excess, and heat the liquid to boiling: no turbidity or precipitate is produced.
Heavy metals— the limit is 0.001%.
Limit of magnesium and alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of ammonium chloride, and proceed as directed in the test for Limit of magnesium and alkali salts under Calcium Carbonate, beginning with “heat the solution, and boil for 1 minute”: the weight of the residue does not exceed 5 mg (1.0%).
Organic volatile impurities meets the requirements.
Calcium Chloride Dihydrate BP Specifications
Calcium Chloride BP dihydrate
CaCl2,2H2OıDEFINITION
Content
97.0 per cent to 103.0 per cent of CaCl2,2H2O.CHARACTERS
Appearance
White or almost white, crystalline powder, hygroscopic.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity
To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the colour and if the solution is colourless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates
Maximum 300 ppm.
Aluminium
To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia and boil the solution. No turbidity or precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for aluminium maximum 1 ppm.
Barium
To 10 ml of solution S add 1 ml of calcium sulphate solution R . After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron
Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals
Maximum 0.5 per cent.
Heavy metals
Maximum 20 ppm.
Calcium Chloride Hexahydrate BP Specifications
Calcium chloride, hexahydrate
CaCl2,6H2ODEFINITION
Content
97.0 per cent to 103.0 per cent of CaCl2-6H2O.CHARACTERS
Appearance
White or almost white, crystalline mass or colourless crystals.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
It solidifies at about 29 °C.TESTS
Solution S
Dissolve 15.0 g in carbon dioxide-free water prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and not more intensely colored than reference solution.
Acidity or alkalinity
To 10 ml of freshly prepared solution S add 0.1 ml of phenolphthalein solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid is required to discharge the colour and if the solution is colourless, not more than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates
Maximum 200 ppm.
Aluminium
To 10 ml of solution S add 2 ml of ammonium chloride solution R and 1 ml of dilute ammonia R1 . Heat to boiling. No turbidity or precipitate is formed. If intended for use in the manufacture of dialysis solutions, the above test is replaced by the test for aluminium : maximum 1 ppm.
Barium
To 10 ml of solution S add 1 ml of calcium sulphate solution. After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron
Maximum 7 ppm, determined on solution S.
Magnesium and alkali metals
Maximum 0.3 per cent.
Heavy metals
Maximum 15 ppm.
Calcium Chloride FCC Food Grade, US Food Chemical Codex
CaCl2 Formula wt, anhydrous 110.98
CaCl2·2H2O Formula wt, dihydrate 147.01
Calcium ChlorideDESCRIPTION
Calcium Chloride occurs as white, hard fragments, granules, or powder. It is anhydrous or contains two molecules of water of hydration. It is deliquescent. It is soluble in water and slightly soluble in alcohol. The pH of a 1:20 aqueous solution is between 4.5 and 11.0.REQUIREMENTS
Assay Anhydrous: Not less than 93.0% and not more than 100.5% of CaCl2; Dihydrate: Not less than 99.0% and not more than 107.0% of CaCl2·2H2O.
Acid-Insoluble Matter Anhydrous: Not more than 0.02%; no particles per kilogram of sample greater than 2 mm in any dimension.
Arsenic Not more than 3 mg/kg.
Fluoride Not more than 0.004%.
Lead Not more than 5 mg/kg.
Magnesium and Alkali Salts Anhydrous: Not more than 5.0%; Dihydrate: Not more than 4.0%.
Calcium Chloride Solution FCC Food Grade, US Food Chemical Codex
Calcium Chloride
DESCRIPTION
Calcium Chloride Solution occurs as a clear to slightly turbid, colorless or slightly colored liquid at room temperature. It is normally available in a concentration range of about 35% to 45% of CaCl2.REQUIREMENTS
Assay Not less than 90.0% and not more than 110.0%, by weight, of the labeled amount of calcium chloride, expressed as CaCl2.
Alkalinity [as Ca(OH)2] Not more than 0.3%.
Fluoride Not more than 0.004%, calculated on the amount of CaCl2 as determined in the Assay.
Lead Not more than 4 mg/kg, calculated on the amount of CaCl2 as determined in the Assay.
Magnesium and Alkali Salts Not more than 5.0%, calculated on the amount of Calcium Chloride as determined in the Assay.
Calcium Chloride Dihydrate ACS Analytical Reagent specifications
CaCl2 . 2H2O
REQUIREMENTS
Formula Wt 147.01
CAS Number 10035-04-8
Calcium Chloride
Assay
99.0-105.0% CaCl2 - 2H2O
pH of a 5% solution
4.5-8.5 at 25C
MAXIMUM ALLOWABLE
Insoluble matter
0.01%
Oxidizing substances (as NO3)
0.003%
Sulfate (SO4)
0.01%
Ammonium (NH4)
0.005%
Barium (Ba)
0.005%
Heavy metals (as Pb)
5 ppm
Iron (Fe)
0.001%
Magnesium (Mg)
0.005%
Potassium (K)
0.01%
Sodium (Na)
0.02%
Strontium (Sr)
0.1%
Calcium Chloride Desiccant
CaCl2
Formula Wt 110.98
CAS Number 10043-52-4REQUIREMENTS
Assay ≥ 96.0% CaCl2MAXIMUM ALLOWABLE
Titrable base 0.006 meq/g
Calcium ChlorideCalcium Chloride BP IP USP ACS Analytical Reagent FCC Food Grade manufacturers
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: usa@mubychem.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.
