Muby Chemicals and a few more manufacturing units are owned by Kamdar Family. Mubychem Group is the pioneer manufacturer of Zinc Sulphate etc in India. Established in 1976, we have led a quality revolution across our product range. Mubychem group has several manufacturing facilities spread across Western India. Our associated facility is Food & Drug Administration (FDA) GMP approved to manufacture a wide range of pharmaceutical excipients and food chemicals. We have ISO-9001-2008 Certification ISO-22000-2005 HACCP Certification, Kosher and Halal Certification. We have European "Reach" Registration for exports.
Email This Page Info to a Colleague or Yourself
Zinc Sulfate Zinc Sulphate Manufacturers, MSDS Sheet
Zinc Sulphate or Zinc Sulfate Manufacturers Specifications
Zinc Sulfate BP USP FCC ACS IP
Material Safety Data Sheet Zinc Sulfate MSDS Sheet
SECTION 1. PRODUCT IDENTIFICATION
Product Identity: Zinc Sulfate Monohydrate or Zinc Sulphate Monohydrate
SECTION 2. COMPOSITION / INFORMATION ON INGREDIENTS LD50/LC50
Ingredient: Zinc Sulfate Monohydrate or Zinc Sulphate Monohydrate
CAS Number: 7446-19-7
Trade Names and Synonyms: Zinc Sulphate Monohydrate, ZnSO4H20, Hydrated Zinc Sulfate or Zinc Sulphate
SECTION 3. HAZARDS IDENTIFICATION
Emergency Overview: Zinc Sulfate or Zinc Sulphate is colorless, odorless granules. Not flammable or explosive, but will decompose in extreme heat to produce toxic sulphur oxide gas and zinc oxide fume. The granular solid or dust is relatively non-toxic to humans and poses little immediate hazard to emergency response personnel but is freely soluble in water and can pose a threat to watercourses.
Potential Health Effects: Zinc Sulfate or Zinc Sulphate may irritate eyes, skin and respiratory tract. If dusty it may cause breathing difficulty and irritation of mucous membranes. Ingestion may cause strong stomach cramps and diarrhea and may induce spontaneous vomiting. Chronic health hazards include stomach irritation, abdominal cramps and nausea. Zinc Sulfate or Zinc Sulphate monohydrate is not considered a carcinogen by OSHA, NTP, IARC, ACGIH or the EU
Potential Environmental Effects: Zinc Sulfate or Zinc Sulphate is highly water soluble and is toxic to fish and other aquatic life. It can also be toxic to plant life and other terrestrial organisms at elevated concentrations in soils.
SECTION 4. FIRST AID MEASURES
Eye Contact: Do not allow victim to rub eye(s). Let the eye(s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid(s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING. Have victim drink 2 – 8 oz. (60 – 240 ml) of water. Zinc Sulfate or Zinc Sulphate is an emetic and may cause vomiting. If vomiting occurs naturally, have victim rinse mouth with water again. Obtain medical advice and bring a copy of this MSDS.
SECTION 5. FIRE FIGHTING MEASURES
Fire and Explosion Hazards: Zinc Sulfate or Zinc Sulphate does not burn or support combustion.
Extinguishing Media: Use any means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Toxic fumes of sulfur dioxide may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face piece mask. Do not use water directly on material. Do not allow water run-off to enter sewers or watercourses.
Flashpoint and Method: Not Applicable.
Upper and Lower Flammable Limit: Not Applicable.
Auto ignition Temperature: Not Applicable.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Procedures for Cleanup: Stop release if possible to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: This product can pose a threat to the environment. Contamination of soil and water should be prevented. Keep spillage and runoff from storage areas from entering soil, streams or sewers.
SECTION 7. HANDLING AND STORAGE
Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. It is good practice to keep container closed when not in use. Avoid generating dust and the release of dust into the workplace. Good housekeeping is important to prevent accumulations of dust. Always practice good personal hygiene. Refrain from eating, drinking, or smoking in work areas.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Protective Clothing: The hazard potential of this material is low. Where there is large scale use of this material and significant potential for worker contact, gloves and long sleeved work clothes or disposable coveralls may be necessary. Eye protection should be worn where dust is generated and there is a potential that eye contact may occur.
Ventilation: Use adequate local or general ventilation where necessary to maintain the concentrations of Zinc Sulfate or Zinc Sulphate dust well below the recommended occupational exposure limits for general Particulates, Not Otherwise Specified (PNOS).
Respirators: Where dust or fumes are generated and cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH-approved respiratory protection equipment (a 42CFR84 Class N, R or P-95 particulate filter cartridge).
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Colorless, odorless granules
Physical State: Solid
pH: 5.0 @ 10% solution; 4.5 @ saturated solution
Vapor Pressure: Negligible @ 20°C
Vapor Density: Not Applicable
Boiling Point/Range: Not Applicable
Freezing/Melting Point/Range: Loses water at 238°C; Decomposes at 680°C (1256°F)
Specific Gravity: 3.28
Evaporation Rate: Not Applicable
Coefficient of Water/Oil Distribution: Log p(oct) = -0.07 (estimated)
Odor Threshold: Not Applicable
Solubility in Water: 53.8 g/100 ml at 20 °C
89.5 g/100 ml at 100°C
SECTION 10. STABILITY AND REACTIVITY
Stability and Reactivity: Zinc Sulfate or Zinc Sulphate is stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: None have been identified to date. Avoid excessive heating that may lead to decomposition of the material.
Hazardous Decomposition Products: High temperature operations such as oxy-acetylene cutting, electric arc welding or severe overheating will generate zinc oxide fume which, on inhalation in sufficient quantity, can produce metal fume fever. Under such conditions, sulfur dioxide will also be generated and can cause respiratory distress.
SECTION 11. TOXICOLOGICAL INFORMATION
General: In the form in which this product is sold it is relatively non-toxic. The major route of exposure would be through the generation and inhalation of airborne dust and especially the generation of zinc oxide fume through thermal decomposition.
Skin/Eye: Direct contact may cause local irritation of the eyes or skin but would not cause tissue damage. Eye contact with solutions (>1%) may cause the appearance of white flecks on the lens of the eye. Dust or fume from burning or welding operations may also cause local irritation.
Inhalation: Acute inhalation may result in irritation but is not expected to cause significant harmful effects. Symptoms may include discomfort, coughing, tingling sensation, sneezing and/or shortness of breath and wheezing. Extreme heating of Zinc Sulfate or Zinc Sulphate monohydrate will generate zinc oxide fume. If inhaled, this fume can result in the condition called metal fume fever. The symptoms of metal fume fever will occur within 3 to 10 hours of exposure, and include immediate dryness and irritation of the throat, tightness of the chest, and coughing which may later be followed by flu-like symptoms of fever, malaise, perspiration, frontal headache, muscle cramps, low back pain, occasionally blurred vision, nausea, and vomiting. The symptoms are temporary and generally disappear, without medical intervention, within 24 to 48 hours of onset. There are no recognized complications, after affects, or chronic affects that result from this condition.
Ingestion: Zinc Sulfate or Zinc Sulphate ingestion of large doses can cause anemia and stomach symptoms. Zinc Sulfate or Zinc Sulphate is very astringent, and when ingested in excessive quantities, can irritate the stomach, resulting in abdominal pain, nausea, diarrhea and spontaneous vomiting.
Chronic: In general, zinc is considered to be a low toxicity metal. Zinc is a very important trace element for humans and the body regulates the amount of zinc stored by decreasing absorption and increasing excretion when intake is increased. Industrial experience has not identified any significant chronic effects from Zinc Sulfate or Zinc Sulphate to date. Zinc Sulfate or Zinc Sulphate is not listed as a carcinogen by the Occupational Safety and Health Administration (OSHA), the National Toxicology Program (NTP), the International Agency for Research on Cancer (IARC), the American Conference of Governmental Industrial Hygienists (ACGIH) or the European Union (EU).
SECTION 12. ECOLOGICAL INFORMATION
Zinc Sulfate or Zinc Sulphate has high water solubility and its zinc and manganese contents are directly bioavailable. The zinc in particular may be toxic to aquatic organisms, especially fish, with water hardness, pH and dissolved organic carbon levels being regulating factors. In terrestrial systems, the mobility of zinc and manganese in soil and their degree of bioaccumulation in organisms is dependent on soil chemical conditions.
SECTION 13. DISPOSAL CONSIDERATIONS
Do not wash down drain. Put uncontaminated material back into the process if at all possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
SECTION 14. TRANSPORT INFORMATION
TRANSPORT CANADA CLASSIFICATION........ Not regulated
US DOT HAZARD CLASSIFICATION .......... Class 9, Packing Group III (RQ)
(Regulated only if transported in containers containing 1,000 (RQ) or more lbs. of Zinc Sulfate or Zinc Sulphate.)
SHIPPING NAME U.S. DOT................. Environmentally Hazardous Substance, Solid, n.o.s. (contains Zinc Sulfate or Zinc Sulphate)
DOT REPORTABLE QUANTITY ............... 1000 lbs. per container
US DOT PRODUCT IDENTIFICATION NUMBER... UN3077
MARINE POLLUTANT (U.S.)................ No
IMO CLASSIFICATION..................... Not regulated
SECTION 15. REGULATORY INFORMATION
INGREDIENTS LISTED ON TSCA INVENTORY ............ Yes
HAZARDOUS UNDER HAZARD COMMUNICATION STANDARD.... No
CERCLA SECTION 103 HAZARDOUS SUBSTANCES.......... Zinc Sulfate or Zinc Sulphate .. RQ: 1,000lbs.
EPCRA SECTION 302 EXTREMELY HAZARDOUS SUBSTANCE.. No Ingredients Qualify
EPCRA SECTION 311/312 HAZARD CATEGORIES.......... None.
EPCRA SECTION 313 TOXIC RELEASE INVENTORY........ Zinc Compounds (Zinc Sulfate or Zinc Sulphate)
CAS No. 7446-19-7
INGREDIENTS LISTED ON DSL......................... Yes
WHMIS CLASSIFICATION: ............................ Not a Controlled Product
SECTION 16. OTHER INFORMATION
Our company provides this Zinc Sulfate or Zinc Sulphate MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Zinc Sulfate or Zinc Sulphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Zinc Sulfate manufacturer
Zinc Sulphate manufacturer:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264
USA & Canadian Customers may e-mail: email@example.com
Copyright and Usual Disclaimer is Applicable.
Last updated: 03 June, 2014.
Commercial Pure & BP USP NF IP ACS AR Analytical Reagent, FCC Food Grades Ammonium Chloride Ammonium Chloride Pharmaceutical grade Ammonium Persulphate Persulfate Barium Chloride Benzyl Alcohol Boric Acid Borax Sodium Calcium Chloride Pharmaceutical grade Calcium Chloride Calcium Hydroxide Calcium Oxide; Lime Calcium Sulfate Calcium D Glucarate Saccharate Chromic Chloride; Chromium Chloride Iron Sulphide or Ferrous Sulfide Gentian Violet Magnesium Chloride Pharmaceutical grade Magnesium Sulfate Maleic Acid Manganese Chloride Manganese Sulfate Mono/Di Ammonium Phosphate Mono/Di/Tri Sodium Phosphate Magnesium Chloride Anhydrous & Hexahydrate Methylene Blue Mono/Di/Tri Potassium Phosphate PCB Etchant or Ammonical Etchant Potassium Bromide Potassium Chloride Potassium Chloride Pharmaceutical grade Sodium Acetate Sodium Acetate Pharmaceutical grade Sodium Bicarbonate Sodium Bromide Sodium Chloride Sodium Hydroxide Sodium Diacetate Sodium Hydroxymethanesulphonate Formaldehyde Bisulphite Sodium Thiosulphate Sodium Thiosulfate Pharmaceutical grade Zinc Chloride Zinc Chloride Pharmaceutical grade Zinc Ammonium Chloride Flux Zinc Sulphate or Zinc Sulfate
Exports to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Australia Korea Mexico Brazil Argentina Chile Dubai etc.
God Grant me Serenity
To Accept the things that I can not Change
Courage to Change the things that I can Change
and Wisdom to know the Difference
Wise men never sit and cry over their loss. But work on to redress the same.